Your basket is currently empty!
Cisco 2851 Integrated Service Router. 2 GE Ports 4 HWIC, ENM & VeNOM Slots
Cisco 2851 Integrated Service Router 2 X GE Ports 4 HWIC Slots, ENM Slot, VeNOM Slot The Cisco 2851 router features a console port, an auxiliary port, two Universal Serial Bus (USB) ports, four high-speed WAN interface card (HWIC) slots, two10/100 Gigabit Ethernet RJ45 ports, a Enhanced Network Module (ENM) slot, a Voice Network Module […]
Description
Cisco 2851 Integrated Service Router 2 X GE Ports 4 HWIC Slots, ENM Slot, VeNOM Slot
The Cisco 2851 router features a console port, an auxiliary port, two Universal Serial Bus (USB) ports, four high-speed WAN interface card (HWIC) slots, two10/100 Gigabit Ethernet RJ45 ports, a Enhanced Network Module (ENM) slot, a Voice Network Module (VeNoM) slot, and a Compact Flash (CF) drive. The Cisco 2851 router supports one single-width network module, four single-width or two double-width HWICs, two internal advanced integration modules (AIMs)1, three internal packet voice data modules (PVDMs), two fast Ethernet connections, and 16 ports of IP phone power output
Product Overview
The Cisco 2800 Series comprises four platforms (refer to Figure 1): the Cisco 2801, the Cisco 2811, the Cisco 2821, and the Cisco 2851. The Cisco 2800 Series provides significant additional value compared to prior generations of Cisco routers at similar price points by offering up to a fivefold performance improvement, up to a tenfold increase in security and voice performance, embedded service options, and dramatically increased slot performance and density while maintaining support for most of the more than 90 existing modules that are available today for the Cisco 1700, Cisco 2600, and Cisco 3700 Series.
The Cisco 2800 Series features the ability to deliver multiple high-quality simultaneous services at wire speed up to multiple T1/E1/xDSL connections. The routers offer embedded encryption acceleration and on the motherboard voice digital-signal-processor (DSP) slots; intrusion prevention system (IPS) and firewall functions; optional integrated call processing and voice mail support; high-density interfaces for a wide range of wired and wireless connectivity requirements; and sufficient performance and slot density for future network expansion requirements and advanced applications.
Product Specifications
Table 7. Chassis Specifications
|
Cisco 2800 Series |
Cisco 2801 |
Cisco 2811 |
Cisco 2821 |
Cisco 2851 |
|
|
Product Architecture |
|||||
|
DRAM |
• Default: 128 MB
• Maximum: 384 MB
|
• Default: 256 MB
• Maximum: 768 MB
|
• Default: 256 MB
• Maximum: 1 GB
|
||
|
Compact Flash |
• Default: 64 MB
• Maximum: 128MB
|
• Default: 64 MB
• Maximum: 256 MB
|
|||
|
Fixed USB 1.1 Ports |
1 |
2 |
|||
|
Onboard LAN Ports |
2-10/100 |
2-10/100/1000 |
|||
|
Onboard AIM (Internal) Slot |
2 |
||||
|
Interface Card Slots |
• 4 slots; 2 slots support HWIC, WIC, VIC, or VWIC type modules
• 1 slot supports WIC, VIC, or VWIC type modules
• 1 slot supports VIC or VWIC type modules
|
4 slots, each slot can support HWIC, WIC, VIC, or VWIC type modules |
|||
|
Network-Module Slot |
No |
1 slot, supports NM and NME type modules |
1 slot, supports NM, NME and NME-X type modules |
1 slot, supports NM, NME, NME-X, NMD and NME-XD type modules |
|
|
Extension Voice Module Slot |
0 |
1 |
|||
|
PVDM (DSP) Slots on Motherboard |
2 |
3 |
|||
|
Integrated Hardware-Based Encryption |
Yes |
||||
|
VPN Hardware Acceleration (on Motherboard) |
DES, 3DES, AES 128, AES 192, and AES 256 |
||||
|
Optional Integrated In-Line Power (PoE) |
Yes, requires AC-IP power supply |
||||
|
Console Port |
1 |
||||
|
Auxiliary Port |
1 |
||||
|
Minimum Cisco IOS Software Release |
12.3(8)T |
||||
|
Rack Mounting |
Yes, 19-inch |
Yes, 19- and 23-in. options |
|||
|
Wall Mounting |
No |
Yes |
No |
No |
|
|
Power Requirements |
|||||
|
AC Input Voltage |
100 to 240 VAC, autoranging |
||||
|
AC Input Frequency |
47-63 Hz |
||||
|
AC Input Current |
2A (110V) 1A (230V) |
3A (110V) 2A (230V) |
|||
|
AC Input Surge Current |
50A maximum, one cycle (-48V power included) |
||||
|
AC-IP Maximum In-Line Power Distribution |
120W |
160W |
240W |
360W |
|
|
AC-IP Input Current |
4A (110V) 2A (230V) |
8A (110V) 4A (230V) |
|||
|
AC-IP Input Surge Current |
50A maximum, one cycle (-48V power included) |
||||
|
DC Input Voltage |
No DC Power Option available |
24 to 60 VDC, autoranging positive or negative |
|||
|
DC Input Current |
• No DC Power Option available
|
• 8A (24V)
• 3A (60V)
• Startup current 50A<10 ms
|
• 12A (24V)
• 5A (60V)
• Startup current 50A<10 ms
|
||
|
Typical Power Dissipation (No Modules) |
42W (143 BTU/hr) |
32W (109 BTU/hr) |
54W (184 BTU/hr) |
58W (197 BTU/hr) |
|
|
Power Dissipation-AC without IP Phone Support |
150W (511 BTU/hr) |
170W (580 BTU/hr) |
280W (955 BTU/hr) |
280W (955 BTU/hr) |
|
|
Power Dissipation-AC with IP Phone Support-System Only |
150W (511 BTU/hr) |
210W (717 BTU/hr) |
310W (1058 BTU/hr) |
370W (1262 BTU/hr) |
|
|
Power Dissipation-AC with IP Phone Support-IP Phones |
180W (612 BTU/hr) |
160W (546 BTU/hr) |
240W (819 BTU/hr) |
360W (1128 BTU/hr) |
|
|
Power Dissipation-DC |
Not applicable |
180W (614 BTU/hr) |
300W (1024 BTU/hr) |
300W (1024 BTU/hr) |
|
|
RPS |
No |
External only, connector for RPS provided by default |
|||
|
Recommended RPS Unit |
No RPS option |
Cisco RPS-2300 Redundant Power System |
|||
|
Environmental Specifications |
|||||